Test - Test_133

LED permanent ON

Check if the LED is permanent on if there is user-input from the button

Safety

Derived
SIL	no safety requirements referencing

Base
Name	LED permanent ON
Type	Test
Description	Check if the LED is permanent on if there is user-input from the button
User-ID	Test_133
UID	_Csid1lU5Ee2zY-a2salcrw
Test configuration
Parent	Functional Tests Blinking LED
Status	implemented
Priority	0
Procedures and input-data
After a regular power-on, the button is pressed
Expected results
The LED shall be permanently on while the button is pressed

(Safety)Requirements referencing to test LED permanent ON.

(Safety)Requirement	Parent	User-ID	Author	Creation Date	Start Date	Deadline	Expense	Responsibe	Category	Type	Status	Function Type	SIL derived	SIL manual	SIL effective	Tests	Technical Functions	Software	Hardware	Signals	Global variables	Activation events	Use-Cases	User-Stories	Refining	Conflicting	refined by	conflicted by
(Requirement_93) LED Button While the button is pressed, the LED shall be on permanently.	Blinking LED	Requirement_93		Wed Jun 08 17:18:27 CEST 2022			0.0		product	functional	implemented	-	-	-	-	(Test_133) LED permanent ON	Blinking LED	run_LED									(Requirement_94) LED (Requirement_32) LED Blink (Requirement_93) LED Button

Technical-Functions associated with the requirements referencing to test LED permanent ON.

Function	LFB	Software	Hardware	Technical Functions	sub Technical Functions	Requirements	sub Requirements
Blinking LED An LED shall blink to indicate that the system is alive and responding.	Button Controller LED	run_LED drv_LED run_readButton ButtonRead	PA5		Blinking LED UART	(Requirement_32) LED Blink (Requirement_93) LED Button (SafetyRequirement_95) Runnable activation by cyclic events (Requirement_95) UART	(Requirement_32) LED Blink (Requirement_93) LED Button (SafetyRequirement_110) Hardware Interfacing (SafetyRequirement_111) SignalLayer features (Requirement_95) UART (SafetyRequirement_94) Global variables (Requirement_95) UART

Software-Units associated with the requirements referencing to test LED permanent ON.

Unit	Parent	Function calls	Technical Functions	Requirements	Type	Tasks	WCET	Stack	ROM	Globals	ProtectionSets	SIL req	SIL ach	sub Technical Functions (R)	sub Requirements (R)	Has a return value (R)	SystemStates (R)	Ingoing Trigger Ports (R)	Outgoing Trigger Ports (R)	Ingoing Data Ports (R)	Outgoing Data Ports (R)	Signals (D)	Runnables (D)	DataType (D)	Is Synchronous (D)	Hardware (D)	Ports (G)	Callers (F)	Return Type (F)	Parameters (F)
run_LED Controls the LED signal and thus the LED	LED		Blinking LED	(Requirement_32) LED Blink (Requirement_93) LED Button	Runnable	LED	0	0	0			-	QM	Blinking LED	(SafetyRequirement_110) Hardware Interfacing (SafetyRequirement_111) SignalLayer features (Requirement_95) UART	false	Blink UART	Runnable_00_blink_Tick		Runnable_blink_Button_IN	Runnable_00_blink_OUT	-	-	-	-	-	-	-	-	-